How To Unlock Bootloader On Any Micromax Smartphone. In India, Micromax offers cheap to mid-range smartphones at reasonable prices. Despite stiff competition in the smartphone sector, it appears that Micromax Mobile has a distinct fan base, particularly in India. If you own a Micromax handset, you should read our instructions on how to unlock the bootloader on any Micromax Smartphone.
To return to the matter at hand, if you’re a lover of Android or already own one of the Micromax devices, you should consider manually unlocking the bootloader in order to begin customizing your device. Aside from rooting and installing customizations, you’ll also be able to flash third-party AOSP ROMs on your Micromax handset.
TABLE OF CONTENTS
What exactly is Bootloader Unlock?
Why Do You Need a Bootloader Unlock?
Pre-Requisites:
1. You’ll Need a PC or a Laptop
2. Power Up Your Device
3. Download and install the ADB and Fastboot binaries.
4. Setup USB Drivers
5. Make use of the original USB cable
6. Enable USB Debugging / OEM Unlocking
How to Unlock the Bootloader on a Micromax Smartphone
1. Enter Fastboot mode
2. Bootloader Unlocking Instructions
What exactly is Bootloader Unlock?
Unlocking your Android phone’s bootloader is one of the first steps toward extreme customization, such as rooting, installing modules, flashing custom firmware, and more. A Bootloader, on the other hand, is a vendor-proprietary image that manages the kernel on a device. It basically safeguards the device state and totally verifies the integrity of the boot and recovery partitions.
In a nutshell, once you turn on or restart your Android device, it first displays a boot screen or boot logo corresponding to the brand and instructs the hardware and boot partitions to either boot into the system or boot into the recovery/fastboot mode. For numerous security reasons, each Android smartphone OEM provides its handsets with a locked bootloader by default.
As an Android user, you now have the option of either staying with a locked bootloader without substantially customizing your handset or going with the flow of unrestricted customizations by manually unlocking the bootloader.
Why Do You Need a Bootloader Unlock?
Some bootloaders may include an additional layer of security that only loads the operating system after it has been approved. The precise procedure of evaluating and certifying unlicensed software differs for every device, but the working mechanism or effects are the same. It is obvious that you cannot run a third-party system or firmware on the device when the bootloader is locked.
As a result, an unlocked bootloader is required in order to get root access, install modules, or flash third-party firmware (aftermarket ROM) on your Android smartphone without trouble. When you unbox your handset and boot it for the first time, it operates on the locked bootloader given by the manufacturer since the manufacturer does not want you to run any other firmware on the device.
However, several manufacturers now provide an official method or support to users in order to quickly unlock the device bootloader. While a few OEMs now provide warranty coverage for their smartphones even after the bootloader has been unlocked. The method for unlocking the bootloader is simple enough for most people, but you must follow the procedures precisely.
Pre-Requisites:
Before beginning the bootloader unlocking process, you should ensure that you have completed all of the pre-requisites listed below.
For example,
1. You’ll Need a PC or a Laptop
To connect your Micromax gadget to a PC or laptop, you’ll need to use a USB data cable. Once connected, you’ll be able to quickly use the ADB and Fastboot utilities.
2. Power Up Your Device
Before you begin, make sure your phone is fully charged. Maintain at least 50% charge to guarantee that the operation runs smoothly and without interruptions.
3. Download and install the ADB and Fastboot binaries.
ADB is required to root or edit your device’s system files with the correct commands. While the Fastboot is required to send orders to the phone’s firmware in order to alter it. ADB Fastboot utilities can be downloaded from this page.
4. Setup USB Drivers
After connecting via a USB connection, USB drivers are also necessary to simply connect and construct a communication bridge between the mobile device and a computer. It maintains consistent connectivity while flashing or transferring files between the mobile device and the computer, or vice versa. You’ll need the Micromax USB Drivers for your phone here.
5. Make use of the original USB cable
Using an original USB cable, on the other hand, can assist you in effortlessly connecting and maintaining a strong connection state between the gadget and the PC. If you use a third-party local USB cable, you may occasionally have connectivity loss, flashing failure errors, or data transferring difficulties.
6. Enable USB Debugging / OEM Unlocking
Before connecting and using the ADB Fastboot method, you must also enable USB Debugging and enable the OEM Unlock option on your handset. To accomplish this, you must:
- Navigate to the Settings menu on your phone.
- Now, navigate to the About Phone section > Scroll down to the bottom to get the Build Number.
- Tap it seven times quickly to enable Developer Options on your phone.
- Return to the Settings page and search for Developer Options.
- Here, you’ll need to tap on it and toggle the USB Debugging switch on.
- After that, scroll down a little and switch on the Allow OEM Unlocking toggle.
After you’ve enabled both options, you can exit the Settings page.
How to Unlock the Bootloader on a Micromax Smartphone
GetDroidTips is not liable for any problems or faults that you may encounter while or after following this instruction.
Make a comprehensive backup of the device’s data and do it at your own risk.
Please Note: Before proceeding, make a complete backup of any necessary data from your device.
All internal data will be fully erased throughout the bootloader unlocking process.
1. Enter Fastboot mode
- Ascertain that you have already installed the ADB and Fastboot tools on your PC. If you haven’t already, do this first.
- Now, on your PC, unzip the ADB and Fastboot tool zip file.
- Then, using a USB data cord, connect your Micromax cellphone to the computer.
- Wait for the computer to recognize the connected device.
- The USB driver will be installed on the PC once this is completed.
- Navigate to the extracted ADB and Fastboot folders on your PC > Now, hold down the Shift key and right-click the mouse.
- From the popup menu, choose the Open PowerShell window here. If UAC prompts you, select Yes to provide admin access.
- Then, inside the PowerShell window, type the following command line and press Enter to see if your device is linked to ADB:
adb devices
- If you see a prompt on the device screen asking you to allow USB Debugging on your phone, hit OK to continue.
- To restart your device into bootloader, enter the following command line and press Enter:
adb reboot bootloader
- When your device reboots into the bootloader, the locked status will be displayed.
You are now ready to proceed with the way to Unlock Bootloader on your Micromax smartphone outlined below.
2. Bootloader Unlocking Instructions.
- To see if the device is correctly connected, enter the following command line. This will also determine whether or not the fastboot drivers are installed.
fastboot devices
- This command will display a list of all connected devices on the screen. If the serial number of your connected device appears, proceed to the next step. [ If the serial number does not appear, it signifies that either the drivers were not successfully installed or you omitted a step. Make a point of retrying the preceding steps.
- After the command has detected the device, hit the Volume Down button on the phone to browse to the BOOT TO DOWNLOAD MODE option.
To pick this option, press the Power key. - To unlock the bootloader, use the following command and press Enter: [Anyone]
fastboot flashing unlock
OR,
fastboot oem unlock
- A confirmation message will appear on the screen of your Micromax model.
- Simply select Yes and hit the Power button to confirm bootloader unlocking.
- Allow the process to finish. After that, your phone will immediately reboot into bootloader mode.
- Now, execute the following command and press Enter to restart your device normally:
fastboot reboot
You’re finished. Enjoy!
That’s it, fellas. We hope you found this guide useful. If you have any further questions,
please leave them in the comments section below.
