Posted by Samsung J2 Core Display Light Problem Solution download from here. In this article, we’ll offer fixes for the harm. Backlighting Options for the Samsung J2 Core J260 LCD Display Light Ways Issue If the phone’s display has a problem or the light on the screen is not functioning correctly. It can easily harm the Samsung J2 Core SM-J260F/LCD G’s screen. You can try to replace it with an LCD in satisfactory condition. However, if the Samsung Galaxy M12 screen is flickering, dim, or has no backlight at all.
A Samsung J2 Core J260 without a backlight is typically a sign of an LCD with no display, in which case the LCD screen turns white. Alternately, even though the LCD display is dark, the ringing and notification noises can still be heard.
Overview of the Samsung J2 Core J260 Device
Black, Gold, and Blue are the three color choices for the smartphone. A screen with a contemporary aspect ratio is included with the Samsung Galaxy J2 Core (2020).
An Exynos 7570 quad-core processor and Mali-T720 GPU power the Samsung J2 Core. It will be supported by 16 GB of internal storage and 1 GB of RAM. It can also be expanded via a microSDXC (dedicated slot). Android 8.1 Oreo is present (Go edition).
An easily replaceable Li-Ion 2600 mAh battery will power the smartphone. The Galaxy J2 Core (2020) has an 8 MP rear camera with an f/2.2 gap and LED lighting. There will be a 5 MP camera on the front.
What Is An LCD Or Backlight For A Samsung J2 Core J260?
To begin with, an LCD is your phone’s digital display interface. It is the interactive part where you can see what is happening as you use the phone or tap an icon, watch a video, listen to music, play a game, etc. You won’t be able to enjoy it as before if the LCD (liquid crystal display) is broken or malfunctioning. This is where the LCD backlight enters the picture; it consists of a number of LEDs (light-emitting diodes) that have been carefully organized and fitted into the layers of the LCD screen to provide illumination for the display.
Solutions for the Samsung J2 Core J260 Backlight
To quickly determine whether the LCD’s backlight LEDs were still functional or already broken, you might first try to repair or install a new Display screen module in order to address the black screen Samsung Galaxy M12 backlight issue.
If you can do so without harming the LCD flex connector, you can also test the LEDs using a multimeter.
Refer to the solution below and find the highlighted components on the PCB board if the freshly installed LCD still displays the same issue and the LED light is not lit.
Possible issues with the backlight on a Samsung J2 Core J260 include:
If you have experienced one of the symptoms listed above, your phone is a Samsung J2 Core J260. The damage can then be repaired in order to reverse it.
1. Replace or modify the screen
The first step in dealing with such damage is to try replacing the new LCD part with one that is in good shape. This can be used if your phone’s screen has cracked or burst due to a hard fall. Attempting to replace the new LCD will hopefully help to address this detrimental issue.
2. Inspect the display socket and the line.
Actual C11 The fluid that enters the phone cannot harm the backlight of the device. and harms the motherboard’s display socket and line. It is advised to uninstall every component of the phone in order to complete the check in order to fix it. Water usually affects the breaking path by corroding and rusting the track and socket. So, for step repair, clean up corrosion and rust right away. If a path broke, fix it right away using the path jumper approach.
3. Examine and change any internal components.
If your phone’s line and LCD are both in fine shape, but the backlight suddenly becomes damaged. The internal components could then have issues. You can use the diagram image provided by Mobilintec Team as guidance while attempting to repair the backlight damage.
Measure each component, and if any are found to be defective, replace them right away with ones of the same kind and value. Try to inspect the diode’s components as well as the coil indicated on the diagram. The component is frequently damaged, which causes the backlight display to appear.
