Here we provide you with Xiaomi Redmi Note 5 Plus (MEG 7) Firmware free of cost. This Firmware fixes many issues of the Xiaomi Redmi Note 5 Plus (MEG 7).
Many companies provide this firmware, but all companies provide you after paying but cellphonefirmwares provides you free, with no need for any activation charges or complex registration method.
Here is the Firmware info:
HOW TO FLASH:
Just use the cm2 flash device and the QUALCOMM module for flashing with this type of firmware. This firmware is read with a cm2 device.
PASSWORD OF FIRMWARE: gazishohel2018
The Most Common Method of Flashing:
How to Install Android Oreo on Xiaomi Redmi Note 5 Plus
Make sure your Phone has charged up to 80% or above we recommend you try this method.
Now go to the folder where ADB and Fastboot Tool are on your PC.
Open the ADB folder and press and hold the “ Shift ” key and right-click anywhere in that folder. ” key and anywhere in that folder.
Now select “ Open PowerShell window here ” from the menu. ” from the menu.
Connect your Xiaomi Redmi Note 5 Plus to the PC using the USB cable.
Now check your connection by typing the below command ADB devices if your devices are listed, it means your Phone is connected successfully.
Now boot your Phone into Bootloader/Fastboot mode using the below command ADB reboot bootloader
But this firmware flashes only EDL mode, so don’t use the upper fastboot method. You can flash with UMT, CM2, EDL mode flasher, etc.
- Redmi 5 Plus MEG7 firmware download
- Xiaomi Redmi 5 Plus firmware updates
- Redmi 5 Plus MEG7 firmware free download
- Xiaomi Redmi 5 Plus EDL mode flashing
- Official Xiaomi Redmi 5 Plus Stock Firmware ROM